How To Set Armitron Watch Wr330ft

You lot don't need to exist a master watchmaker to set up or alter the time on an Armitron watch.

Prototype Credit: blyjak/iStock/Getty Images

In This Article

• Set the Time
• Alter the Time
• Add a Time Zone

The Armitron Pro Sport Watch is an awesome device for tracking your workouts, charting split up times and hitting your goals. But the time doesn't assault its own. When you commencement get your lookout man, you'll need to set the fourth dimension yourself. And when daylight saving time ends or you travel to dissimilar time zones, you'll need to know how to change the time on an Armitron watch.

Here's everything you demand to know about Armitron watch ready times and how to easily change them.

​Buy it:​ Armitron.com (men, women); ​Price:​ starting at $25

How to Prepare the Time on an Armitron Pro Sport Watch

Follow the steps below, from the Armitron Pro Sport Watch manual, to set the time:

To ready the time on your Armitron Pro Sport Watch, y'all'll need to know which push does what.

1. Identify Watch Buttons

At that place are four buttons on your watch.

1. The height left button (A) is "Reset"
2. The top right button (D) is "ST/STP," which stands for "Start" and "End."
3. The bottom left button (B) is "Mode."
4. The bottom correct button (C) activates the light.

ii. Agree the Reset Button

To begin setting the fourth dimension, hold the "Reset" button (A) until you hear a beep.

Three out of the four screens on the watch will start to blink. That means you're ready to set the time.

3. Press the Manner Button

Press the bottom left push button (B), "Mode" to access the hour setup.

Notation that pressing this button volition not actually change the hour, but the 60 minutes side of the time display will kickoff to blink. This indicates that you're ready to keep to the adjacent step to ready the hr.

four. Utilize ST/STP to Adjust the Hour

Press the "ST/STP" push button (D) to modify the hour.

Each fourth dimension you press the button, the 60 minutes will increase until it hits 12, after which it will restart at 1.

Printing the "Fashion" button (B) again to fix the hr. When you lot do, the 60 minutes side will stop blinking and the minutes will be fix for setting.

5. Use ST/STP to Conform the Minutes

Press the "ST/STP" push button (D) on the elevation right to increment minutes.

Each time y'all press the push, the number of minutes increases past 1.

Once your spotter is set to the correct fourth dimension, printing the "Reset" push button on the acme left (A) to set the minutes.

Want a 24-Hr Fourth dimension Brandish?

You can set up the time on an Armitron Pro Sport to a 12-hr clock or 24-60 minutes clock, called military time in the United states of america. The sentry sets to 12-hour-time be default.

To switch to a 24-hr time display:

1. Hold the "Reset" button (A) until y'all hear a beep.
2. Press the "ST/STP" push button (D). The "AM" or "PM" icon to the left of the time will go away.
3. Press the "Reset" push (A).

How to Change the Time on an Armitron Watch

Whether daylight saving fourth dimension just ended or you're moving to a different time zone, it'south very possible you'll need to change the fourth dimension on your watch.

Doing then follows the same steps yous used to set the fourth dimension in the commencement place. If it has been a while, just refer to steps 1 through 5 of the Armitron watch instructions above.

How to Add Multiple Time Zones

If y'all need to know the times in multiple fourth dimension zones, you can gear up the time for another different time zone on your picket.

Follow the steps beneath to set up an boosted time:

1. To enter the 2d Time Zone mode, printing the "Mode" button three times.
2. Printing the "Reset" button. The hours icon will offset flashing.
3. Printing the "ST/STP" button to change the hours.
4. When you've prepare the correct hour, printing the "Mode" button again. This will set up the hours and let you to change the minutes. The minutes icon will begin flashing.
5. Printing the "ST/STP" button again to increment the minutes.
6. In one case yous've selected the correct minutes, printing the "Reset" button to set the time.
7. Press the "Mode" push to render to your main time zone.

More Fitness Trackers and Watches

Source: https://www.livestrong.com/article/247211-instructions-to-set-the-time-on-an-armitron-pro-sports-watch/

Share this post